224, "Disk Manager expected to find your new drive %s in the %s position but instead found it in the %s position. \n\nWould you like to continue setting up the drive in the %s position?"
225, "Disk Manager expected to find your new drive in the %s position. We did not detect a new drive at that position or any other position in the system. Try to install the drive again by selecting the \"Add New Hard Disk\" button and following the manual."
226, "Primary Master (PCI)"
227, "Primary Slave (PCI)"
228, "Secondary Master (PCI)"
229, "Secondary Slave (PCI)"
230, "Insert diskette"
231, "Configuration information for your system needs to be saved to your Disk Manager diskette. Make sure your Disk Manager diskette is in your floppy drive and the write-protect tab is not set."
232, "Select the drive on the right that you wish to set up by clicking the appropriate hard drive icon on the right.\n\nIf your drive is not installed on one of the standard motherboard controllers, you need to select the appropriate controller tab to choose your drive.\n\nIf your drive is not shown, shutdown your system and check your jumper settings and cable connections."
233, "The selected hard drive contains existing partitions.\n\nIf you decide to continue, all existing data will be lost!\n\nMake absolutely sure you want to continue with the currently selected hard drive."
234, "Choose how you want to install your new hard drive.\n\nIf you would like to copy all of the data from your old boot partition, select \"Install drive as new boot drive\".\n\nIf you are adding the drive for additional capacity, choose \"Install drive as additional storage\"."
235, "Select the operating system that you will be installing or have already installed on your computer.\n\nThis information will be used to determine the types and sizes of partitions created."
236, "Select \"Easy Installation\" to have the installation program choose the appropriate partition types and sizes for your installation.\n\nSelect \"Advanced Installation\" to choose the number, size, and type of partitions to be created."
237, "Select the \"Clear\" button to create a new partition table.\n\nSelect the \"Add\" button to insert another partition if there is available space.\n\nSelect the \"Modify\" button to change the partition type and/or cluster size of a selected partition.\n\nSelect the \"Delete\" button to remove the selected partition from the table."
238, "Check the information to the right to verify that the correct drive to be installed is selected and that the installation information is correct.\n\nUse the \"Back\" button to change any of the installation options."
239, "Use the maintenance options on the right for the following:\n\nAdd the Dynamic Drive Overlay to a boot diskette.\n\nUpgrade Disk Manager by re-writing the MBR boot code to all drives and updating the Dynamic Drive Overlay if it is installed.\n\nConvert your existing BIOS overlay driver if installed to the Dynamic Drive Overlay."
